Features:

• 750w heater
• 7 minute heat up time
• Continuous output
• Approx. 200m3 smoke output (7062 cubic feet/min)
• Remote Control
• Auto timer
• Output level control
• 1 litre fluid container
• Direct thermal protection
• Optional DMX module

Mechanical Specifications:

Fluid consumption (max.):
50ml/min

DIRECT THERMAL PROTECTION DEVICE (DTPD)
This small yet crucial component is the last line of defence against catastrophic failure. This machine’s DTPD is made from a solid ceramic composite. This guarantees extremely precise overheat monitoring and is unaffected by ambient temperature changes.

Electronic Pump Ramping (EPR)
EPR is an intelligent means of warning of a drop in temperature which could result in ‘wet smoke’ (residue). The pumps respond to this signal by running slower and pumping less fluid, thus allowing the heaters to restore optimum operational temperature. This guarantees a continuous flow of smoke using highly efficient, lower wattage heaters.

Soft Start Electronics
The ‘crack’ created during the initial burst of smoke is caused by the pump pressure overcoming the incredible back pressure of the heat exchanger. The unique Soft Start Electronics in this machine gradually powers the pump, eliminating this crack and ensuring a quieter and smoother operational level following initial start up.

Compact Timer Remote
Jem hand-held remotes are safe, user friendly, low voltage remotes which offer precision auto-timer and output level controls. The auto-timer is simple to set with ‘Fog On’ adjustable between 0 and 15 seconds, while the delay period is pre-set at 1 minute. Once the reliable timer is engaged you are free to concentrate on the music and light.

Fluid Container (1 litre)
All Jem smoke, haze and heavy fog machines are designed to carry removable fluid containers of varying sizes depending on the model’s application. The removable container makes for quicker refills and protects the machine from damage through spillage in transit.

Heat Exchangers (750W)
All Jem heat exchangers are designed for high efficiency performance. Only the purest grade LM24 aluminium is used in the production process which eliminates the risk of porosity (pockets of gas within the casting which can cause heater failure). All heat exchangers contain cuprous helicoils of at least 2.8 metres in length, ensuring a continuous flow of pure, dry, white smoke.